{"title":"Parts","description":"\u003cp\u003eSmall bike parts for specific problems: finishing bar tape without electrical tape, a tail light that sits in the Specialized saddle, a headlight that survives a crash, covers and mudguards for exposed SRAM and Specialized parts, a wall clamp that stores a bike upright, and a bag for the dead space under the bottom bracket. Every part is designed and made in Slovakia in small runs. Nothing is a rebranded import. Filter by fit below, or read the fit guide if you are not sure a part fits your bike.\u003c\/p\u003e","products":[{"product_id":"bar-tape-finishing-clamp","title":"Wrap Clamp, bar tape finishing clamp","description":"\u003ch2\u003eThe problem\u003c\/h2\u003e\u003cp\u003eLook at the end of the bar tape on almost any road bike. It is held by a strip of electrical tape. On a brand new bike in the shop it is already wrinkled. A week later the glue edge has caught a grey line of dust. After a season it curls, peels, and the tape end unwinds with it. Every re-wrap ends the same way, because there was never a proper part for this job.\u003c\/p\u003e\u003ch2\u003eThe fix\u003c\/h2\u003e\u003cp\u003eWrap Clamp is that part. A rigid ring that presses the end of the wrap flat against the bar and holds it there. One clean line, the same on both sides, every time. Nothing sticky, nothing that collects dust, nothing to peel. It is shaped for road drop bars and routes over the brake hose, so it sits under the hood like it came with the bike.\u003c\/p\u003e\u003cp\u003eFits 23.8 mm bar tops with brake hose routing. The shift cable version is coming. Choose black polished, black matte or white to match the cockpit.\u003c\/p\u003e\u003cp\u003eDesigned by BAGATO. Made by ride.parts in Slovakia.\u003c\/p\u003e","brand":"ride.parts","offers":[{"title":"Black polished","offer_id":58329806373195,"sku":"RP-WC-BP","price":19.0,"currency_code":"EUR","in_stock":true},{"title":"Black matte","offer_id":58329806405963,"sku":"RP-WC-BM","price":19.0,"currency_code":"EUR","in_stock":true},{"title":"White","offer_id":58329806438731,"sku":"RP-WC-W","price":19.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1079\/9176\/1227\/files\/wrap-clamp-black-matte-drop-bar.png?v=1788298589"},{"product_id":"fox-rampage-visor-pins","title":"Breakaway Visor Pins for Fox Rampage","description":"\u003ch2\u003eThe problem\u003c\/h2\u003e\u003cp\u003eIn a typical mild crash the rider rolls and the visor breaks away, exactly as it should. Then the pins are gone. Without them the visor is done, and often the action camera mount goes with it. The helmet is fine, the visor is fine, and you still cannot ride with it because of two tiny pieces of plastic nobody stocks.\u003c\/p\u003e\u003ch2\u003eThe fix\u003c\/h2\u003e\u003cp\u003eBreakaway replacement pins for Fox Rampage helmets, made to the original 6.0 mm pin size. Keep a set in your pack, snap the visor back on, ride on. They are designed to break away like the originals, so the helmet keeps its intended behaviour in a crash. The set has six pins: two elevated and four lowered, so both visor positions are covered with spares to go.\u003c\/p\u003e\u003cp\u003eDesigned and made by ride.parts in Slovakia.\u003c\/p\u003e","brand":"ride.parts","offers":[{"title":"Default Title","offer_id":58315748376907,"sku":"RP-VP-STD","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1079\/9176\/1227\/files\/visor-pins-black-set.jpg?v=1788402697"},{"product_id":"gopro-hero-13-lens-cover","title":"GoPro Hero 13 Lens Cover and ND Lens Boxes","description":"\u003ch2\u003eThe problem\u003c\/h2\u003e\u003cp\u003eThe GoPro Hero 13 finally has swappable lenses, and now every ride starts with a fingerprint. The spare ND lenses rattle loose in a pocket with keys and tools, pick up grit and get scratched. Every lens swap on the trail means fingers on the glass and a smeared clip you only notice at home.\u003c\/p\u003e\u003ch2\u003eThe fix\u003c\/h2\u003e\u003cp\u003eA minimal lens cover that snaps over the lens on the camera, and stacking lens boxes that hold your spare ND lenses clean and in order. The boxes are shaped so the lens goes from box to camera and back without your fingers ever touching the glass. Boxes come in sizes ND 4, 8, 16 and 32, and they stack into one small block that lives in a hip pack.\u003c\/p\u003e\u003cp\u003eDesigned and made by ride.parts in Slovakia.\u003c\/p\u003e","brand":"ride.parts","offers":[{"title":"Default Title","offer_id":58315754471755,"sku":"RP-GP-STD","price":19.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1079\/9176\/1227\/files\/gopro-lens-cover-white-set.jpg?v=1788402697"},{"product_id":"vertical-bike-wall-mount","title":"Wall Wheel Clamp, vertical bike wall mount","description":"\u003ch2\u003eThe problem\u003c\/h2\u003e\u003cp\u003eA bike in a flat takes the width of a hallway. The usual fix is a steel hook that scrapes the rim every time you lift the bike onto it, or a rack that turns the wall into a workshop. Both look like exactly what they are: hardware bolted to your living room.\u003c\/p\u003e\u003ch2\u003eThe fix\u003c\/h2\u003e\u003cp\u003eA single clamp on the wall that grips the wheel. Mount it high and park the bike upright on its rear wheel, so it takes a strip of wall instead of the floor. Mount it low and it holds the rear wheel of a bike standing on the floor, so the bike stays straight and never leans. The rigid ASA shell holds the shape, the soft TPU liner grips the tyre, and the rim never touches anything hard.\u003c\/p\u003e\u003cp\u003eHousing in black, gray or white. The inner liner is always starry black.\u003c\/p\u003e\u003cp\u003eDesigned and made by ride.parts in Slovakia.\u003c\/p\u003e","brand":"ride.parts","offers":[{"title":"White","offer_id":58321586422091,"sku":"RP-WM-W","price":19.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":58321586454859,"sku":"RP-WM-B","price":19.0,"currency_code":"EUR","in_stock":true},{"title":"Gray","offer_id":58321586487627,"sku":"RP-WM-G","price":19.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1079\/9176\/1227\/files\/wall-clamp-white-side.jpg?v=1788308021"},{"product_id":"specialized-saddle-tail-light","title":"Flush Tail Light for Specialized saddles","description":"\u003ch2\u003eThe problem\u003c\/h2\u003e\u003cp\u003eEvery rear light hangs off something. A rubber strap around the seatpost that slides and points at the ground. A clip on the saddle rail that rattles. A bracket that ruins the line of a clean bike and gets in the way of a saddle bag. And the strap always fails first, usually in the rain.\u003c\/p\u003e\u003ch2\u003eThe fix\u003c\/h2\u003e\u003cp\u003eA tail light shaped to the recess in the back of stock Specialized saddles. It sits flush, so it looks like part of the saddle, not an add-on. No zip ties, no rubber straps, no bracket, nothing dangling. The battery is a removable pack, the same one our Low-Mount Headlight uses, so one spare covers both lights.\u003c\/p\u003e\u003cp\u003eFits the Specialized Bridge Sport saddle, 143 mm, and one more stock Specialized saddle with the same recess. Send us your saddle model if you are unsure.\u003c\/p\u003e\u003cp\u003eDesigned and made by ride.parts in Slovakia.\u003c\/p\u003e","brand":"ride.parts","offers":[{"title":"Default Title","offer_id":58315786355019,"sku":"RP-TL-STD","price":49.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1079\/9176\/1227\/files\/tail-light-saddle-rear.jpg?v=1788305809"},{"product_id":"low-mount-mtb-headlight","title":"Low-Mount Crash-Safe MTB Headlight","description":"\u003ch2\u003eThe problem\u003c\/h2\u003e\u003cp\u003eWhen a mountain bike flips, everything that sticks up gets ripped off. A headlight perched on top of the bar is the first thing to go, and it takes the mount with it. The other failure is quieter: an integrated battery that dies at dusk, an hour from the car, with no way to swap it.\u003c\/p\u003e\u003ch2\u003eThe fix\u003c\/h2\u003e\u003cp\u003eThis headlight sits small and low on the bar, tucked in next to the stem, where the bar and the stem shield it in a crash. It is a one piece clamp, so there is no bracket to snap. The battery is a removable pack, the same one our Flush Tail Light uses, so one spare covers both lights. When the pack runs empty far from home, it runs on three AAA batteries from any petrol station. No dead integrated battery, no dead light.\u003c\/p\u003e\u003cp\u003eDesigned and made by ride.parts in Slovakia.\u003c\/p\u003e","brand":"ride.parts","offers":[{"title":"Default Title","offer_id":58315821547851,"sku":"RP-HL-STD","price":89.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1079\/9176\/1227\/files\/headlight-aluminium-bar-mounted.jpg?v=1788402697"},{"product_id":"sram-gx-eagle-derailleur-cover","title":"SRAM GX Eagle Derailleur Cover","description":"\u003ch2\u003eThe problem\u003c\/h2\u003e\u003cp\u003eThe rear derailleur is the lowest, most exposed part on a mountain bike. SRAM Eagle mechs scratch on the first rock garden, and a new one looks five years old after one season. Then comes the strike that cracks the outer plate, and the whole mech is an expensive replacement.\u003c\/p\u003e\u003ch2\u003eThe fix\u003c\/h2\u003e\u003cp\u003eA cover shaped to the SRAM Eagle body. It snaps over the outer parallelogram plate with no tools and takes the rock strike so the mech does not. On a new derailleur it keeps the finish. On an old one it hides the scratches and the bike looks new again. Black polished is the house style; other colours on request.\u003c\/p\u003e\u003cp\u003eGX Eagle is the confirmed fit. Other Eagle mechs share the body shape; send us your model and we will confirm.\u003c\/p\u003e\u003cp\u003eDesigned and made by ride.parts in Slovakia.\u003c\/p\u003e","brand":"ride.parts","offers":[{"title":"Default Title","offer_id":58315826397515,"sku":"RP-DC-STD","price":24.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1079\/9176\/1227\/files\/sram-cover-derailleur-angle.jpg?v=1788308275"},{"product_id":"specialized-linkage-mudguard","title":"Linkage Mudguard for Specialized full suspension","description":"\u003ch2\u003eThe problem\u003c\/h2\u003e\u003cp\u003eSpecialized leaves the suspension linkage exposed. The lower and upper arms sit right behind the rear tyre, in the spray. Every wet ride packs grit into the pivot bearings, and stones and branches hit the arms head on. Bearings die early and a linkage service is a whole afternoon.\u003c\/p\u003e\u003ch2\u003eThe fix\u003c\/h2\u003e\u003cp\u003eA two part flap set shaped to the Specialized linkage. One flap mounts on the lower arm, one on the upper arm, and together they shield the pivots from mud, dust, stones and branches. They follow the lines of the frame, so they look like something Specialized forgot to fit.\u003c\/p\u003e\u003cp\u003eFit depends on the frame model and generation. Send us your bike model and year and we will confirm.\u003c\/p\u003e\u003cp\u003eDesigned and made by ride.parts in Slovakia.\u003c\/p\u003e","brand":"ride.parts","offers":[{"title":"Default Title","offer_id":58315828920651,"sku":"RP-LM-STD","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1079\/9176\/1227\/files\/mud-flaps-pair-top_c13a312f-5a6d-4bd0-8728-0ac32003ea88.jpg?v=1788880037"},{"product_id":"under-frame-bike-bag","title":"Under-Frame Storage Bag for road and gravel","description":"\u003ch2\u003eThe problem\u003c\/h2\u003e\u003cp\u003eRoad and gravel bikes have one pocket of dead space: the triangle in front of the bottom bracket, under the down tube. It is where every stone off the front wheel hits the frame. Meanwhile a tube, a tool and a CO2 cartridge go into jersey pockets or a saddle bag that swings.\u003c\/p\u003e\u003ch2\u003eThe fix\u003c\/h2\u003e\u003cp\u003eThis bag uses that space. It is inspired by the superbike frames with integrated storage, but it detaches. The sturdy bottom extends under the bottom bracket, so the shell takes the strikes instead of the paint. Tools stay on the bike, the pockets stay empty, and the bike looks built in, not bolted on.\u003c\/p\u003e\u003cp\u003eFits road and gravel frames with free space in front of the bottom bracket. Send us your frame model if you are unsure.\u003c\/p\u003e\u003cp\u003eDesigned by BAGATO. Made by ride.parts in Slovakia.\u003c\/p\u003e","brand":"ride.parts","offers":[{"title":"Default Title","offer_id":58315832852811,"sku":"RP-UB-STD","price":129.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1079\/9176\/1227\/files\/storage-bag-hero.jpg?v=1788307369"}],"url":"https:\/\/ride.parts\/collections\/all\/fit-specialized.oembed","provider":"ride.parts","version":"1.0","type":"link"}